Go to the StrideLinx Cloud Fleet Manager app, which is accessible from the Apps menu in the top right corner if you are currently in a different StrideLinx Cloud app.

This is the protocol that the StrideLinx router will use to communicate with the PLC. You first have to select a communication protocol. Your PLC is now ready and you can continue setting up the StrideLinx router by selecting a communication protocol.

Expand, make sure 'Module Parameter' is checked, and press.

Now all that's left is to write these settings to the PLC.

Save the setting by pressing at the top.Select protocol 'TCP' and choose a Port No.This is the MELSEC Communication Protocol. Expand Setting Item and open the External Device Configuration window by double clicking ' '.Expand in the Item List and double click.

In the Navigation pane, go to > (FX5UCPU in the example below) >.On a new row, select protocol 'TCP', select open system 'MC Protocol' and choose a Host Station Port Number between 1025-4999 or 5010-65534.Check the option ' Set Open Setting in Ethernet Configuration window' and press (indicated by #2).If you haven't already, enter an IP address for the CPU Module (indicated by #1) and a Subnet Mask Pattern (usually 255.255.255.0).In the Project Window, open > and go to the tab.This can be done by following the next steps: Setting up the CPU Module enables the PLC to communicate with an external device (i.e. iQ-F and iQ-R series are set up using GX Works3.L and Q series are set up using GX Works2.This article shows you how to do this for a Mitsubishi PLC in both MELSOFT GX Works2 and GX Works3.ĭepending on the type of Mitsubishi PLC you're using, the setup of the PLC has to be performed in either GX Works2 or GX Works3: This is done by selecting a communication protocol and defining the variables. The second step in Cloud Logging is setting up a data source. + Step 3: Run the setup.Please first activate Cloud Logging (or start the 30 day free trial) if you haven't already. + Step 2: Go to GX-Works2 Version 1.560J folder + Step 1: Download and extract GX-Works2 software with password + Windows 10 Video for installing GX-Works2 Instructions for installing GX-Works2 with images If you do not need to use the connection with FX5U PLC, the GX-Works2 software is fully featured and the installation capacity is small. GX-Works 2 V1.610L (New Version) Download.GX-Works2 software has additional programming languages such as FBD (Function Block Diagram), SFC (Sequential Function Chart) GX-Works3 Software for FX5U Programming Download.This is an upgrade and replacement software for GX-Developer software with many new features for programming! Hello! Today would like to share to you the GX-Works2 software.

Gx works2 network parameters